- SKU JEFWR4.0-2.5KG
- Electrode Length 350mm
- Gross Weight 2.3 kgs
-
A versatile, deep penetrating steel electrode with smooth, stable arc characteristics. The coating produces a forceful, spray-type arc, resulting in deep penetrating welds. The slag is thin and easily removable. Class E6013 blue rutile coated electrodes suitable for welding Carbon and C-Mn steels with medium mechanical properties. Typical Application: Vehicles, ship building and repair, sheet metal, build-up of over machined and worn mild steel surfaces, general light fabrication. Soft arc therefore suitable for relatively thin plates and bridging wide gaps. All position electrode including vertical down. Rutile general purpose
-
A versatile, deep penetrating steel electrode with smooth, stable arc characteristics. The coating produces a forceful, spray-type arc, resulting in deep penetrating welds. The slag is thin and easily removable. Class E6013 blue rutile coated electrodes suitable for welding Carbon and C-Mn steels with medium mechanical properties. Typical Application: Vehicles, ship building and repair, sheet metal, build-up of over machined and worn mild steel surfaces, general light fabrication. Soft arc therefore suitable for relatively thin plates and bridging wide gaps. All position electrode including vertical down. Rutile general purpose
- SKU JEFWR3.2-2.5KG
- Electrode Length 350mm
- Gross Weight 2.35 kgs
-
A versatile, deep penetrating steel electrode with smooth, stable arc characteristics. The coating produces a forceful, spray-type arc, resulting in deep penetrating welds. The slag is thin and easily removable. Class E6013 blue rutile coated electrodes suitable for welding Carbon and C-Mn steels with medium mechanical properties. Typical Application: Vehicles, ship building and repair, sheet metal, build-up of over machined and worn mild steel surfaces, general light fabrication. Soft arc therefore suitable for relatively thin plates and bridging wide gaps. All position electrode including vertical down. Rutile general purpose
- SKU JEFWR2.5-2.5KG
- Electrode Length 350mm
- Gross Weight 2.5 kgs
-
Suitable for a wide range of welding jobs and widely used due to their reliability, these Jefferson MIG welders have a 35% duty cycle at rated output current and can weld without interruption for longer periods of time. The range includes 2-roll and 4-roll wire feeder options and each are fitted with anti-dust protection. Robust housing and complete with handle and castor wheels for manoeuvrability. Jefferson AutoMIG welders should be fitted with the correct plug, failure to comply with this will void warranty. Includes: Argon regulator, 3m earth lead, 4m 250Amp Binzel MIG torch
- SKU KIT-JEFMIG225
- Voltage 230V
- Welder MIG
- Welding Wire Diameter 0.6-1.0mm
- Input Current 32A
- Output Range 225Amp
- Rated Duty Cycle 35% @ 225Amp
- Torch 250Amp BINZEL® MIG
- Wire Feed 2 roll
- Voltage Steps 6
- Gross Weight 55 kgs
-
Suitable for a wide range of welding jobs and widely used due to their reliability, these Jefferson MIG welders have a 35% duty cycle at rated output current and can weld without interruption for longer periods of time. The range includes 2-roll and 4-roll wire feeder options and each are fitted with anti-dust protection Robust housing and complete with handle and castor wheels for manoeuvrability. Jefferson AutoMIG welders should be fitted with the correct plug, failure to comply with this will void warranty. Includes: Argon regulator, 3m earth lead, 250Amp Binzel MIG torch
- SKU KIT-JEFMIG275
- Voltage 230V
- Welder MIG
- Welding Wire Diameter 0.6-1.2mm
- Input Current 32A
- Output Range 275Amp
- Rated Duty Cycle 35% @ 275Amp
- Torch 250Amp BINZEL® MIG
- Wire Feed 4 roll
- Voltage Steps 12
- Gross Weight 73 kgs
-
Supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity Use in gasless mode will require the purchase of a spool of fluxed cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller
- SKU JEFMIG215-AM
- Welder MIG
- Max. Input Current 8.95kVA
- Input Power 230V Single Phase
- Output Range 40-215A
- Rated Duty Cycle 60% 100A, 30% @ 145A, 15% @ 215A
- Cooling System System: Forced Air
- Torch Non-live
- Gas Type CO2 / Argon Mix & Argon & CO2
- Wire Capacity 5-15kg
- Output Current 100-215A
- Gross Weight 44 kgs
-
Supplied set up in gas mode, but can also easily be switched to gasless mode by a simple change of polarity Use in gasless mode will require the purchase of a spool of fluxed cored wire, a pack of 1.0mm tips and a 1.0mm wire feed roller
- SKU JEFMIG185-AM
- Welder MIG
- Max. Input Current 7.35kVA
- Input Power 230V Single Phase
- Output Range 35-180Amp
- Rated Duty Cycle 60% 90A, 30% @ 130A, 15% @ 185A
- Cooling System System: Forced Air
- Torch Non-live
- Gas Type CO2 / Argon Mix & Argon & CO2
- Wire Capacity 5-15kg
- Output Current 90-185A
- Gross Weight 42 kgs
-
- Super Quality 1
- Cutting Disc for Mild Steel
- 230mm x 3.0 x 22mm Disc
- 22mm Standard Bore
- Depressed Centre
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
-
- Cutting Disc for Mild Steel
- Depressed Centre
- 115mm x 2.5mm Disc
- 22mm Standard Bore
- EN12413
- Max RPM 13,300
- Manufactured in the EU
-
- Cutting Disc for Mild Steel
- Depressed Centre
- 115mm x 2.5mm Disc
- 22mm Standard Bore
- EN12413
- Max RPM 13,300
- Pack of 25
- Manufactured in the EU
-
9" Skinny Disc
- Cutting Disc for Mild Steel & Stainless Steel
- 230mm x 2.2mm x 22mm Disc
- 22mm Standard Bore
- Flat center
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
- Pack of 50
-
9" Skinny Disc
- Cutting Disc for Mild Steel & Stainless Steel
- 230mm x 2.0mm x 22mm Disc
- 22mm Standard Bore
- Flat center
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
-
- Super Quality 1
- Cutting Disc for Mild Steel
- 230mm x 3.0 x 22mm Disc
- 22mm Standard Bore
- Depressed Centre
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
- Pack Of 50
-
Heavy duty coupling, built to withstand all the rigours of all industrial and commercial use Cast iron body has been designed for maximum strength and fits on top of or inside the A-frame Variant: coupling only Ball head: 50mm Maximum towing capacity: 2,700kg 71/320 approval: CD87/002 94/20 approval: e11*94/20*0106*00
- Capacity 1,600 - 2,700kg
- Max Nose Weight 100kg
- OE Ref EH27MF
- OEM BRADLEY
- OE Model HU3
- Length 700mm
- Hole Diameter 14mm
- Weight 19.6kg
- Hole Pattern 170 L x 200mm W x 110mm N
- Barcode 5391195032330
- Box Qty 1.00
-
Bradley HU12 50mm ball coupling head kit 2030 Supplied complete with bellows, ties, nuts and bolts
- Capacity 3500kg
- OE Ref KIT2030
- OEM BRADLEY
- OE Model HU12, HU14, HU8HE
- Length 200mm
- Weight 3kg
- Thread Size M14
- Barcode 5391195099029
- Box Qty 1.00
-
Spring damped hitch Variant: 4 bolt Ball head: 50mm Maximum towing capacity: 1,500kg
- Capacity 1,500kg
- Max Nose Weight 75kg
- OE Ref D30M2
- OEM BRADLEY
- OE Model D30
- Length 405mm
- Hole Diameter 14mm
- Weight 7.5kg
- Hole Pattern 140 x 60mm
- Barcode 5391195032064
- Box Qty 1
