- DC 12-24 Volts
- 6 LED x 1.5 Watt
- Stop Tail & Indicator
- Bolt on or Self Adhesive
- IP67 Ingress Protection
- Extreme Temperature Reliability
- ECE 148 ECE R10
- Rear Stop/Tail = R148 R1-S1 Red LED Clear Lens
- Rear Indicator = R148 2a Amber LED Clear Lens
- 131 x 31 x 6.6mm
- 526
-
-
- Housing: Powder coated aluminum
- 16 pcs 5 watt high intensity CREE XTE LEDs
- Lamp finish: PMMA
- Water tightness: Splashproof (IP68)
- CISPR Radio suppressed
- Light color: Cold white
- Color temperature: 6000 K.
- Nominal lamp power: 80 Watt
- 16 pcs 5 watt high intensity CREE XTE LEDs
- Suitable for 10-30V DC
- 9,500 lumens
- Lamp width: 109 mm
- Lamp height: 109 mm
- Lamp thickness: 57 mm
-
•Application: LED Trailer Tail Light Combination •Direction: Left hand Side •Stop / Tail / Indicator / Fog / Reverse / Reflector •9/33v Application •Built in smart load resistance on indictors •50,000h / E Mark Certified / IP68 •ECE R10, R3, R6, R7, R23, R38 Approved •EMC - CISPR25 Class 4 (Radio Frequency Suppression) •Supplied with socket & 30cm of cable •Dimensions 218 x 145 x 35mm
-
GENERAL CHARACTERISTICS •Application: LED Trailer Tail Light Combination •Direction: Right hand Side •Stop / Tail / Indicator / Fog / Reverse / Reflector •9/33v Application •Built in smart load resistance on indictors •50,000h / E Mark Certified / IP68 •ECE R10, R3, R6, R7, R23, R38 Approved •EMC - CISPR25 Class 4 (Radio Frequency Suppression) •Supplied with socket & 30cm of cable •Dimensions 218 x 145 x 35mm
-
- 12-24 Volts
- 3 Watt
- 4 Cables
- Pre Wired
- Clear Lens White Flash
- CE Approved
- 2285W
-
• Long barrel • Plastic body • 1/4" BSP quick release fittings Nozzle Length 280mm
-
- Powerful 18 V motor delivers over 562 bar max operating pressure
- 1219mm high pressure flex hose with spring guard
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Best in class run time - dispenses up to 7 cartridges per charge
- Superior handle balance and ergonomics - only 355mm long and 3.9kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop and LED fuel gauge - added user convenience and less down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400g cartridge,
- Pressure (bar) - 562
- Voltage (V) - 18
- M18GG M18 Grease Gun Bare Unit
-
- Powerful 18 V motor delivers over 562 bar max operating pressure
- 1219mm high pressure flex hose with spring guard
- REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability
- Best in class run time - dispenses up to 7 cartridges per charge
- Superior handle balance and ergonomics - only 355mm long and 3.9kg
- Air bleeder valve - priming mechanism for quick flow
- Integrated hose storage, shoulder strap loop and LED fuel gauge - added user convenience and less down time
- Three way loading - bulk, cartridge and suction capable
- Grease capacity 400g cartridge, 473ml bulk
- Pressure (bar) - 562
- Voltage (V) - 18
- M18GG M18 Grease Gun Bare Unit
- M18 B5 M18 5.0Ah Li Ion Battery
- M12-18FC Multi Rapid Fast Charger 220V
-
More Information Brand Oerlikon Type E312-16 3.2 Welding Electrodes For Dissimilar Metals
-
- High quality air line attachment
- PCL Male fitting
- 1/4 BSP Female Inlet
-
- High quality air line attachment
- PCL Male fitting
- 1/4 BSP Male Inlet
-
• Compatible with CGA 600 connection MAPP and Europe type M12*1 & M10*1 thread oxygen cylinder • Advanced gas control system allows for a precision flame (dual flashback arrestors included) • Durable brass burn wand with independent fuel and oxygen controls • Pressure regulated for consistent performance when inverted. • Max. Temp. 3000℃ making it ideal for small brazing, welding and metal-cutting projects • Lightweight & Portable with 1.8m hose • Kit includes: • 1x Metal Carry Case • 1x Torch • 1x Oxygen Bottle • 1x MAPP Bottle • 1x M10 Adapter • 3x Nozzles • 1x Sparker • 1x Safety Glasses
-
• Ph28bar, PQW 13 • UN.1061 IM02.1 • Liquefied Gas • FLAMMABLE, N.O.S (Methyl Acetylene & Propadiene Mixtures, Stabilized) • Certified to EN 12205,1354
-
- ACEA A3/B4-12
- API SL/CF
- MB 229.1
- VW 502.00/505.00
- 5LT Can
-
- ACEA E7
- API CH-4/SL
- MB-Approval 228.3
- Volvo VDS 3, Renault VI RLD-2
- Detroit Diesel 93K215
- Cummins CES 20077/20078
- MAN M 3275
- Cat ECF-1-a/ECF-2
- Deutz DQC III-10
- Global DHD-1
- JASO DH-1
- Mack EO-N/EO-M Plus
- MAN M 3275-1
- MTU Type 2
-
Out of stock
- ACEA C2-12
- API SN/CF
- Renault RN0700
- Fiat 9.55535-S1
- Suitable for Citroen, Honda, Hyundai, Peugeot & Toyota Models
-
Out of stock
- ACEA C2,C3
- API SN
- BMW LL04
- GM Dexos 2
- MB 229.51 / 229.52
- VW 505.01
- Suitable BMW, Mercedes, Opel & Vauxhall Models
-
This gear oil is used in hypoid differentials under very heavy duty conditions and should be used in all transmissions that require EP-transmission oils.
- API GL-5
- Mil-L-2105D
- ZF TE-ML 07A/17B
- 5LT Can
-
This gear oil is used in hypoid differentials under very heavy duty conditions and should be used in all transmissions that require EP-transmission oils.
- API GL-5
- 5LT Can
-
This gear oil is used in hypoid differentials under very heavy duty conditions and should be used in all transmissions that require EP-transmission oils.
- API GL-5
- 5LT Can
-
This fluid may be used for automatic gearboxes, power steering units, torque converters and other equipment for which an ATF Dexron IID fluid is required.
- GM Dexron IID
- MAN 339 Typ Z1
- ZF TE-ML 09/11A/14A
- Allison C4
- Ford SQM-2C9010-A
- Voith 55.6335 (G607)
- Cat TO-2
- Renk
- Ford M2C138-CJ/166-H
- Ford Mercon
-
This fluid may be used for automatic gearboxes, power steering units, torque converters and other equipment for which an ATF Dexron IID fluid is required.
- GM Dexron IID
- MAN 339 Typ Z1
- ZF TE-ML 09/11A/14A
- Allison C4
- Ford SQM-2C9010-A
- Voith 55.6335 (G607)
- Cat TO-2
- Renk
- Ford M2C138-CJ/166-H
- Ford Mercon
-
Out of stock
- ACEA C3-12
- API SN
- Approved under VW 504.00/507.00
- MB-Approval 229.51
- BMW Longlife-04
- Porsche C30
- 5LT Can
-
Out of stock
- Capacity: 5Kg
- EP2 Grease
- Colour: Brown
- Can be Used in Industrial & Automotive Applications
-
Out of stockA universal motor oil, recommended for use in petrol and diesel engines, with or without turbocharging. Suitable for passenger cars and vans. Due to its low SAPS content this motor oil extends the lifetime of particle filters for diesel engines. Warning: These oils have the lowest SAPS limits and may be unsuitable for use in some engines.
- ACEA C4-12
- MB-Approval 226.51
- Renault RN0720
- Suitable for Renault, Nissan, Suzuki Models
- 5LT Can
-
Out of stockMaxol Semi Fluid 00 EP is a high quality multipurpose grease that can be used in both industrial and automotive applications. The consistency of the product makes it suitable for use in centralised lubrication systems that require semi-fluid grease. The product is also suitable for use in gearboxes & power harrows.
-
Suits 500G Screw on grease cartridge Fits Milwaukee battery grease gun
-
- 12/24V
- 12 SMD LEDs
- S/T: 4 LEDs x 0.5W, DI: 4 LEDs x 0.5W, R: 4 LEDs x 1.0W
- Power@ 12v: S: 0.226A, T: 0.028A, DI: 0.156A, R: 0.202A
- Power@ 24v: S: 0.124A, T: 0.021A, DI: 0.103A, R: 0.111A
- Bolt & Nut Mount (174mm distance)
- Lens: PC (Clear / Red / Amber)
- Body / Housing: ABS
- Cable: 300mm
- Ultrasonic Welding
- Rated IP67
- ECE: Reg 10 / Reg 148 / Reg 149
- Oper. Temp.: -40° to +65°
- Dimensions: 191*49.5*30mm
-
- 12-24 Volts
- Rated IP67
- Polycarbonate Lens
- ABS Housing
- Bolt Mounting
- 190*102*35mm
- Reflector | Stop | Tail | Indicator
- ECE Approved Reg 3 | 6 | 7
- Working Temperature -40ºC - +65ºC
-
TX: 20 - 25 - 27 - 30 - 40 - 45 - 50 - 55 - 60 - 70 E-Profile: 10 - 11 - 12 - 14 - 16 - 18 - 20 - 22 - 24 Technical specifications: 1/2" drive chrome-vanadium-steel
-
HEX 5, 6, 8, 10, 2,14, 17, 19 Application: HEX (Internal Hexagon) Drive: 1/2” square Length: 75 mm Made of Chrome Molybdenum-Steel (SNCM-V)
-
TX 20, 25, 30, 40, 45, 50, 55, 60, 70 Application: TX (T-Type) Drive: 1/2” square Length: 75 mm Made of Chrome Molybdenum Steel (SNCM-V)
