- Hydraulic Filter 84248043
-
-
- Puma, T6/T7 Argo Filter Long
- Part number 87708150
- Height 323mm
-
Charging cables: 2.5mm x 2M with fully insulated charging clamps Power Cable: 3x1.0mm x 2M Safety class (DIN 40530): II
- Input Power 30W
- Output 12V / 24V (Voltage)
- Output Charge Peak (EN) 20A (17A)
- Input 0.2A (Charge)
- Battery Capacity 60 - 250Ah
- Rated Duty Cycle 5 sec ON / 30 sec OFF @ 5 Cycles
- Charging Rates 2
- Fast Charge Timer No
- Fuse 1 x 20A / 1 x 5A
- Input 0.4A (Charge)
- - 2A (Start)
- Ingress Protection IP21
- Plug/Socket 3A
- Weight 4.40kg
- Dimensions (H x W x L) 235 x 195 x 190mm
-
• Insulated Gate Bipolar Transistor (IGBT) technology • Integrated smart fan cooling system with thermostat • Includes Voltage Reduction Device (VRD) for improved electrical safety • ARC force / MMA welding • Hot start • Generator friendly • Fitted with 13A plug • Jefferson ARC welders should be fitted with the correct plug, failure to comply with this instruction will void warrantySKUJEFARC140M-230
- Voltage 230V
- Welder ARC
- Frequency 50Hz
- Input Current 13A
- Output Range 20-140Amp
- Rated Duty Cycle 60% @ 90Amp, 25% @ 140Amp
-
• Lift TIG Function • Digital LED Display • Hot Start • Arc Force • Overheat Protection • Generator Friendly • Compatible with 2.5, 3.2, 4.0mm Electrodes • Includes: Blow moulded carry case, 3m welding cable, 2m earth cable
- SKUJEFTARC160-230
- Voltage 230V
- Welder ARC
- Frequency 50Hz
- Input Current 16A
- Output Range 30-160Amp
- Rated Duty Cycle 40% @ 160Amp
- No Load Voltage 60V
- Efficiency 85%
- Cable Connections 35 x 50mm
- Insulation Class F
- Ingress Protection Rating IP21S
-
Sale!Jefferson 7.9Kva Petrol Generator (Electric Start)
- Engine: MacGen 14.0HP Petrol
- Max. Output: 7.9kVA / 6.3kW
- Rated Output: 7.2kVA / 5.8kW
- AC Output: 1x230V 32A / 1x110V 32A (Sockets)
- DC Output: 12V / 8.3A
- Guaranteed Noise Level: 97 dB Lwa
- Dry Weight: 77kg
- Dimensions: 720 x 560 x 590mm
- Start: AVR & electric start
- Fuel Tank: 25 Litre long run
- Running Time: 10 hours
- • Low oil alert • LCD digital display shows voltage, frequency and hour meter • Powered by MacGen • AVR and electric start
-
Button for Joystick, OEM Ref. No.: 51278, VLC2517
- GTIN: 4251692278741
-
Remote control cable with M16x1.5 outer sleeve and M6 inner cable on the valve end and a ball type connection on the control end to suit Nimco / Morse joysticks.
- Length: 1500mm
- Various loaders
- ItemNo: 4K5055
-
Remote control cable with M16x1.5 outer sleeve and M6 inner cable on the valve end and a ball type connection on the control end to suit Nimco / Morse joysticks. Length: 1500mm Various loaders
-
These joysticks use ball joint type cables ends, suitable for a wide range of applications, also thanks to the availability of specific mounting kits for most hydraulic valve brands. Use in conjunction with 4K5 joystick cables Max. cable stroke: 14+14 mm Lever ratio: 6,5:1 Cross-type movement Lateral safety lock Cable type: Standard 1 Switch & cable
-
These joysticks use ball joint type cables ends, suitable for a wide range of applications, also thanks to the availability of specific mounting kits for most hydraulic valve brands. Use in conjunction with 4K5 joystick cables
- Max. cable stroke: 14+14 mm
- Lever ratio: 6,5:1
- Cross-type movement
- Lateral safety lock
- Cable type: Standard
- Operating temperature: -30° ÷ +80°C
-
• Fitted with rubber hose, valve connector and UK • Quick Release air supply fitting • Tested and calibrated to comply with EN 12645:2014 • Supplied with a serial-numbered calibration certificates • Display Type: 80mm Dial-type Pressure Gauge Pressure Regulation Max. Inlet: 15bar / 218psi; Min. Inlet: 7bar / 100psi Inlet Fitting 1/4” Male BSP Thread - 1/4” Male (Quick Release) Outlet FittingTwin - Push on / Hold On Inflation Flow Rate 500L/min @ 13bar Operating Temperature Range-10°C to 60°C Accuracy 2psi / 0.1bar Gross Weight 0.9 kgs
-
Replacement coupling bellows Suitable for Bradley HU3, HU4, HU5, HU6, HU8L and HU8H couplings Tube diameter: 48mm Complete kit includes gaiter and nuts
- OE Ref KIT107
- OEM BRADLEY
- OE Model HU3
- Suitability 1,700 - 2,600kg
- Length 130mm
- Weight 0.2kg
- Thread Size M12
- Barcode 5391195032217
- Box Qty 1.00
-
Bradley HU12 50mm ball coupling head kit 2030 Supplied complete with bellows, ties, nuts and bolts
- Capacity 3500kg
- OE Ref KIT2030
- OEM BRADLEY
- OE Model HU12, HU14, HU8HE
- Length 200mm
- Weight 3kg
- Thread Size M14
- Barcode 5391195099029
- Box Qty 1.00
-
Replacement coupling bellows Suitable for Bradley HU8, HE12, HE14 Mk4 head couplings Tube diameter: 60mm Complete kit includes gaiter and nuts
- OE Ref KIT2039
- Suitability 3,500kg
- Length 70mm
- Weight 0.3kg
- Thread Size M14
- Barcode 5391195032224
- Box Qty 1.00
