- SKU JEFWELHT5TP
- Viewing Area 98 x 55mm
- Optical Class 1/1/1/2
- Light State DIN shade 4
- Operating Temperature Range -5°C to 55°C
- Switching Time Dark to Light 0.00005s
- Arc Sensors 4
- Gross Weight 0.85 kgs
-
Advanced Jefferson Clearweld: automatic darkening filter (ADF) significantly reduces ARC glare during welding processes. 4x ARC sensors. External 9-13 DIN shade, delay & sensitivity controls. UV IR protection up to shade DIN 16. Manual shade & delay adjustment. Powered by solar cells, with built-in Lithium battery. Impact resistant polymide nylon shell with tread plate wrap finish. Tested & approved to EN 379 1/1/1/2
-
Depressed centre. 115mm x 22mm Bore. Max 13300 rpm 80 m/s Excellent grinding & finishing - welding, rust removal, surface preparation, deburring, blending, paint removal & edge grinding.
-
More Information Brand Oerlikon Type E312-16 3.2 Welding Electrodes For Dissimilar Metals
-
• Lift TIG Function • Digital LED Display • Hot Start • Arc Force • Overheat Protection • Generator Friendly • Compatible with 2.5, 3.2, 4.0mm Electrodes • Includes: Blow moulded carry case, 3m welding cable, 2m earth cable
- SKUJEFTARC160-230
- Voltage 230V
- Welder ARC
- Frequency 50Hz
- Input Current 16A
- Output Range 30-160Amp
- Rated Duty Cycle 40% @ 160Amp
- No Load Voltage 60V
- Efficiency 85%
- Cable Connections 35 x 50mm
- Insulation Class F
- Ingress Protection Rating IP21S
-
• Insulated Gate Bipolar Transistor (IGBT) technology • Integrated smart fan cooling system with thermostat • Includes Voltage Reduction Device (VRD) for improved electrical safety • ARC force / MMA welding • Hot start • Generator friendly • Fitted with 13A plug • Jefferson ARC welders should be fitted with the correct plug, failure to comply with this instruction will void warrantySKUJEFARC140M-230
- Voltage 230V
- Welder ARC
- Frequency 50Hz
- Input Current 13A
- Output Range 20-140Amp
- Rated Duty Cycle 60% @ 90Amp, 25% @ 140Amp
-
9" Skinny Disc
- Cutting Disc for Mild Steel & Stainless Steel
- 230mm x 2.0mm x 22mm Disc
- 22mm Standard Bore
- Flat center
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
-
9" Skinny Disc
- Cutting Disc for Mild Steel & Stainless Steel
- 230mm x 2.2mm x 22mm Disc
- 22mm Standard Bore
- Flat center
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
- Pack of 50
-
- Cutting disc for Steel and Stainless Steel
- 115mm x 1.0mm
- Skinny Disc
- 22mm Standard Bore
- Flat Centre
- EN12413
- Max RPM 13,300
- Manufactured in the EU
- Pack Of 25
-
- Cutting disc for Steel and Stainless Steel
- 115mm x 1.0mm
- Skinny Disc
- 22mm Standard Bore
- Flat Centre
- EN12413
- Max RPM 13,300
- Manufactured in the EU
-
- Super Quality 1
- Cutting Disc for Mild Steel
- 230mm x 3.0 x 22mm Disc
- 22mm Standard Bore
- Depressed Centre
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
-
- Super Quality 1
- Cutting Disc for Mild Steel
- 230mm x 3.0 x 22mm Disc
- 22mm Standard Bore
- Depressed Centre
- EN12413
- Max RPM 6,650
- Cutting Only
- Manufactured in the EU
- Pack Of 50
-
- Cutting Disc for Mild Steel
- Depressed Centre
- 115mm x 2.5mm Disc
- 22mm Standard Bore
- EN12413
- Max RPM 13,300
- Pack of 25
- Manufactured in the EU
-
- Cutting Disc for Mild Steel
- Depressed Centre
- 115mm x 2.5mm Disc
- 22mm Standard Bore
- EN12413
- Max RPM 13,300
- Manufactured in the EU
-
Out of stockSlim & lightweight. Welding mode & grinding mode. Carbon fibre wrap finish. Automatic light adjustment from light to dark in 1/20,000th of a second. Shade control from Din 9 - 13. UV / IR protection up to shade DIN 16. Adjustable sensitivity
- SKU JEFWELHT3C
- Viewing Area 98 x 55mm
- Light State DIN Shade 4
- Shade Control DIN 9-13
- UV/IR Protection DIN 16
- Function Modes Welding & Grinding
- Switching Time Light to Dark 1/20,000s
- Switching Time Dark to Light 0.3-0.9s
- Arc Sensors 4
- Power On/Off Fully automatic
- Certified To EN 379 & EN 175:B
- Gross Weight 1.15 kgs
-
Out of stockFully adjustable headgear for comfort and fatigue reduction. Powered by 1x CR2045 lithium battery & solar cells. Features auto-off circuitry at 15-20 minutes and low-battery indicator. Two independent ARC Sensors for increased safety and protection. Variable shade 9-13 with sensitivity and delay controls. Suitable for MMA, MIG, TIG, PAC, PAW, CAC-A processes
- SKU JEFWELHT6G-02
- Viewing Area 92 x 42mm
- Optical Class 1/2/1/2
- Light State DIN 4
- UV/IR Protection DIN 16
- Operating Temperature Range 5°C to 50°C
- Cartridge Size 110 x 90 x 9mm
- Switching Time Light to Dark 1/25000s
- Switching Time Dark to Light High: 0.25~0.3s, Medium: 0.35~0.6s , Low: 0.65~0.85s
- Power On/Off Fully automatic
- Sensitivity Control Low / Medium / High
- Low Amperage TIG 20A (DC, AC)
- Gross Weight 0.77 kgs
-
Welding mode & grinding mode. Long-lasting, environmentally-friendly power supply. External and internal shade, sensitivity, delay time and grinding mode controls. Photoelectric sensor technology with high-quality dual LCD and filter. Reliable and safe arc protection. Portable and balanced design. Matt black finish. Fully compliant with current safety and technical standards
- SKU JEFWELHT4G
- Optical Class 1/2/1/2
- Function Modes Welding & Grinding
- Operating Temperature Range -5˚C to 55˚C
- Switching Time Light to Dark 1/25,000s
- Gross Weight 0.75 kgs
